The Basics Behind Electrical PAT Testing

Article Written By: James Copper

Pat testing, also known as portable appliance testing, is a vital process of any health and safety policy. The following article has been written as a helpful guide to two things, the legal implications of the process and the required technical areas.

The HSE (Health and Safety Executive) has stated that a quarter of all reported electrical accidents are caused by portable appliances. There is a legal responsibility places on all employers, employees and any self employed people to ensure that the requirements of the testing regulations are met.

They should take reasonable steps in order to ensure that no dangerous outcomes can result from the use of electrical equipment. In order for this to be carried out correctly there is a need for a regular, systematic set of rules requiring maintenance, inspection and also testing.

The individual who does the testing must have a good understanding of electrical, thermal and mechanical damage that can occur to various electrical appliances and equipment. He / she must also be aware of the damage that can occur to the cabling of the appliances and equipment. This knowledge allows the testing procedures to be carried out efficiently.

In the majority of testing cases it will be the inspector that carries out the testing. This person is responsible for the visual inspections of the electrical equipment. The formal inspections should only be carried out by people qualified to do them. The test results should be documented. Assessments should also be carried out for the suitability of the appliance to the environment that it is used in.

If there is a harsh or dangerous work environment then special care is required when the testers select the equipment to use for the testing and when they are choosing the frequency of the testing and inspection.

About the Author

James Copper - http://www.atech-uk.co.uk can give you information on electrical installation for your home as they are bournemouth electricians

You Can Link Directly to "The Basics Behind Electrical PAT Testing" by using the url:
http://www.allbestarticles.com//home/improvement/the-basics-behind-electrical-pat-testing.html

This Article Has Been Published on Fri, 27 May 2011 and Read 287 Times

Find All Best Articles at http://www.allbestarticles.com

Rating: Not yet rated

Comments

No comments posted.

Add Comment

You do not have permission to comment. If you log in, you may be able to comment.

Related information on Improvement

Simple Guidelines for Overhauling the Spaces of Living Room!
What A Difference A New Door Can Make
Renovating Your Home
Extend Your Living Area Outdoors With Patio Doors
Things to Know About Central Heating
Doors And Windows For Your New Home
Know About Residential Roofing in Texas
Questions To Ask Solar Panel Installers
Great Layouts for Small and Large Bathrooms
Differences between an RCD and RCBO
Some Reasons Why You Should Probably Look at DIY Plantation Wooden shutters
Creative Home Renovation in Melbourne
What Can You Use A Concrete Garage For
How to Create Ambience in a Room
Where to Find the Best Apartment Mailboxes for Sale
Be Creative with Shower curtains and shower rails
Pool Maintenance Tips For Summer
Get Creative with your Garage Doors
Ensure You Use the Correct Tradesman for your Home Improvements
Distinguishing Designs of Victorian Homes
What are down lighters and what differences can they make in your house?
What to do during a power cut
Updates to improve your bathroom
Do you have an open plan kitchen-dining area?
Dealing with Roof and Siding Leaks