Adhesive Buying Guide

Article Written By: taamiv

In a shop you could be faced with an enormous choice of adhesives: some designed for specific tasks, others for joining more than one material.

There are several specialist repair adhesives - for joining glass, for mending PVC and for joining polystyrene as well as adhesives for jobs such as fixing wall tiles, putting up wallcoverings and hobby work with paper and card. When choosing an adhesive for a par¬ticular job, there are several points you need to think about.

First, what materials are you joining together? Obviously, the adhesive has to be suitable for both materials if they are different, but the main problem here is with plastics and recognising the plastic is the first task.

Second, how important is strength? With wood glues, the bond can be as strong as the wood itself, while with metal and plastics it will usually be weaker. If strength is all-important, you might need to think about reinforcing the joint in some way.

Third, how big a gap is there to fill? Often, joining two materials will also involve a degree of gap-filling, and adhesives vary in their ability to cope with this. Contact adhesives, for example, need a slight gap in which to work, while eyanoacrylates won't work unless the gap is very small indeed. Epoxy glues, on the other hand, will work with cither small or large gaps.

Fourth, what kind of temperature is the adhesive going to be subjected to? Some adhesives (known as thermoplastic), such as contact adhesives and many of the 'universal' glues, will not withstand heal, while many others (known as thermo¬setting) will retain their strength up to moderately high temperatures. This could matter when you are repairing crockery.

Finally, how important is the appear¬ance? Most adhesives dry to a clear finish, but some end up a pale creamy yellow. Whether or not this will show obviously depends on the thickness of the glue line and, equally importantly, how well you clear away the excess; with many glues, it is difficult to avoid some glue remaining.

Contact adhesives

The main uses for contact adhesives are for sticking thin coverings, such as plastic laminate and veneer, to a surface, and for shoe repairs.

A contact adhesive is applied to both the surfaces to be glued and left until it is dry. The two surfaces are then pressed together and the glue allowed to set. With most contact adhesives, the bond is made instantly (which means careful position¬ing); some contacts allow a short time during which the two surfaces can be adjusted.

Many contact adhesives are solvent based, which means good ventilation is important and that naked flames and cigarettes should not be allowed in the gluing area. Acetone (nail varnish remover) or a special remover is needed for a solvent-based contact adhesive; water-based contact adhesives can be removed with a damp cloth.

Cyanoacrylate adhesives

These so-called 'super glues' set almost instantly, provided there is just a small amount of moisture present. The adhesive is applied to one component and the other held against it for a few seconds. The two components need to fit almost exactly together for the glue to take.

Two-part epoxy adhesives

Although expensive to use for large glu¬ing jobs, epoxics are probably the most useful general repair type of adhesive. They are suitable for wood, metal, plastic and ceramic materials.

Two-part acrylics

These are similar in usage to epoxics, but the method of use is different the glue is applied to one component and the hardener to the other. They generally make stronger joints than epoxics (particularly on metal and plastics), but are not so resistant to wash¬ing and will not fill gaps as well. Use acetone to remove unset adhesive; dry glue can be removed with a trimming knife.

Universal adhesives

The main advantage of this type of adhesives is its case of use you just simply squeeze the adhesive out of a tube, smear it on the surfaces and allow it to set. However, the resultant joint will not be very good and should be used only where strength is not important.

About the Author

Adhesives are very important. You should know how to choose the right adhesives from a long adhesive product list. Just buying something won’t help until you don’t know how to use adhesives.

You Can Link Directly to "Adhesive Buying Guide" by using the url:
http://www.allbestarticles.com//home/home-repair/adhesive-buying-guide.html

This Article Has Been Published on Sat, 23 Jan 2010 and Read 161 Times

Find All Best Articles at http://www.allbestarticles.com

Rating: Not yet rated

Comments

No comments posted.

Add Comment

You do not have permission to comment. If you log in, you may be able to comment.

Related information on Home repair

Broken Appliances: Repair or Replace?
What Is Cavity Wall Insulation
Why UPVC Guttering Remains A Key Factor in Practical Modern Home Design
How Composite Doors And Windows Help In Achieving Energy Efficient Homes
Tips On House Repair And On How To Use Upvc Windows To Create A Modern Look To An Old House
Roll Up Garage Doors Repairs
Five Ways to Prepare For Water Damage
Bent Keys
Garage door opener
Window Replacement: Utah Technicians Are Your Safest Option
The many Benefits of UPVC Windows
London Area Residents Need Not Worry About Replacing Their Sash Cords
The best type of guttering
Various Types Of Waterproofing Products
Choosing The Best Construction and Renovation Service Provide
Fixing a Leaking Roof Hard or Easy?
What Are the Uses of Silicone Spray
Why Some People Pay Too Much For Air Conditioning Services
Atlanta roofing handyman
Sydney Plumbers The Plumbing Specialists
How to Avoid Pipes Corrosion
How Do Ballvalves Work?
Adhesive Buying Guide
House Clearance, Help, Tips and warning signs
Tips For Garage Door Openers Installation